DTF Transfer ONLY - School Leaver 2025 DTF Transfer

• DTF Transfer ONLY – School Leaver 2025 | Vibrant Full-Colour Print for DIY T-Shirts & Apparel

• Ready to Press - you can use an iron for this but be aware it may not last a long time. 
• Do not tumble dry

•  

  Celebrate the end of an era with our School Leaver 2025 DTF Transfer! This high-quality Direct to Film (DTF) print is perfect for adding bold, colourful designs to t-shirts, hoodies, and more. Simply press it on and go – no weeding or mess.

  ✅ Ideal for DIY leavers' tops
  ✅ Bright, long-lasting colours
  ✅ Works on cotton, polyester, and blends
  ✅ Heat press required

  Note: This listing is for the DTF transfer only – garment not included.

DTF Transfer - Transfer Only

Adult Size approx 8 inches wide (height proportional) so that it allows for signatures all around the shirt / image

DTF direct to film transfers.

Once applied to the item these are *** WASHABLE ***NO CRACKS*** NO FADE*** DURABLE***STRECHABLE*** NO WEEDING***DO NOT TUMBLE DRY

It is very durable and It can be used on any colour or type of of material.

This is a ready to press design and not a T-shirt. - no tshirt or item is included only the transfer.

Disclaimer **You must have a Heat Press to use this DTF transfer** these can be used with irons but results may vary depending on pressure used -and iron on transfers may not last as long

Very important; this is "new technology" direct to film (DTF) transfer for use with a Heat Press; We do not recommend using household irons or Cricut Easy Press because the transfer requires precise temperature and even pressure.

Pressing Instructions - Heat Press

 Medium to firm pressure. - COLD PEEL Recommended.

• For cotton and 50/50 blends 320-350F degrees,
• For synthetic or polyester fabrics 280-300F degrees.
• Prepress your fabric for 2 to 3 seconds.
• Then press transfer to fabric for 15 to 20 seconds.
  Material/Fabric Compatibility100% CottonPre-shrunk Cotton100% PolyesterCotton/Poly BlendsTri-blends

If you require a transfer size I don't have listed please message me

The height of the design will be in proportion to the width - if unsure or need to know please message me before ordering.

Using an Iron: 

To apply a DTF (Direct to Film) transfer using a household iron, first preheat the iron to the cotton or linen setting, which is usually around 325°F (163°C). Place the DTF transfer on your fabric, cover it with parchment paper or a Teflon sheet, and apply firm, even pressure with the iron for about 20 seconds. After cooling, you can peel off the transfer sheet, and optionally, apply a second press to enhance durability and matte finish.